USS Accession 350 and Inception MK II USV’s conduct high resolution bathymetry and mobile laser scan survey in Conwy River, Wales

USS Accession 350 and Inception MK II USV’s conduct high resolution bathymetry and mobile laser scan survey in Conwy River, Wales

Guest post: Mr James Williams, Unmanned Survey Solutions

 

Press Release
For Immediate Release

 

Unmanned Survey Solutions (USS) was recently commissioned by Conwy County Borough Council to undertake a Multi-Beam Echo-Sounder (MBES) and mobile laser scan survey of Conwy quay wall, Conwy bridge, Conwy cob and Tal Y Cafn bridge structures located within Conwy River.  As detailed by the Wales Coastal Monitoring Centre (WCMC), the purpose of the survey was to assess the scour extents at the structure’s foundations and to provide additional information on the above-surface structure.

The majority of the survey operations were undertaken in Conwy Harbour using the Accession 350 USV with survey payload consisting of an R2SONIC 2024 MBES, SBG Apogee Navsight INS, Carlson Merlin mobile laser scanner, Valeport SV sensors and Hypack Hysweep data acquisition and post processing software.  Challenges included fast flowing currents, varying depths, numerous mooring buoys and limited operational windows of only ~2.5 hours per high tide to survey all locations.  This required extensive logistical and operational planning, risk assessment mitigation and professional execution of survey operations.

The Tal Y Cafn bridge was located further up Conwy River and required an alternative smaller USV solution due to the shallow water depths and vessel launching restrictions.  At this location an Inception MKII USV with SONIC 2020 MBES, SBG Ekinox-D INS, Valeport SV sensors and Hypack Hysweep software was selected due to its portability and ease of launch.

The results from both surveys were used for scour assessment purposes. All survey operations were conducted without incident and to budget.  James Williams, Director at USS commented ‘We conducted the survey during some of the highest tides of the year so that we could get the vessels into the shallow locations required to complete the works, however this meant we had to deploy and recover the USV’s in fast flowing waters and then undertake the surveys during the limited slack water period over the high tides.  It took careful planning and required precise execution to be successful, something I’m proud to say was achieved by the USV team.’

Bryn Shiland, Programme Manager, explained ‘‘It is important to assess the condition our structures and can be difficult when a structure is submerged within a watercourse. USS were chosen due to their specialism in underwater surveying. The USS team were professional and delivered the desired results’.

Unmanned Survey Solutions

USS design, build and operate USV’s for Hydrographic, Geophysical, Environmental and Scientific requirements.

They offer product sales for two USV models:

  • USS Accession which has a base hull length of 3.50m with optional additional hull sections to make 4.25m or 5.00m
  • USS Inception MK II

USS also undertake survey services as required by the customer.

Figure 3 - USS Accession 350 USVFigure 4 - USS Inception MK II at Tal Y Cafn

Leave a Comment

Your email address will not be published.